How do I convert my CO2 magazine into HPA!
Some of pic, when last time I Convert CO2 Magazine and 12gr CO2 Cartridge into HPA (direct filling with hill pump).
Tools and preparation:
1. CO2 Magazine (KP07 CO2 magazine as sample)
2. Mini coupler thread M10x1 (threaded outside)
3. Empty 12gr CO2 cartridge
4. Nuts for M10x1
Please take a look the following pic for step by step:
The converted magazine Can be used with 3000/4500psi HPA cylinder with regulator and transfer hose or direct filling with hill pump.
The cylinder/cartridge have been tested more than 2000psi. But for your standard gun please do not exceed 1500psi, ;D
because over pressure will hold the output valve needle too tight, standard hammer spring doesn’t strong enough to knock the pin.
You will get 8-12 powerful shoot with 1500psi (depend on output valve hole / diameter).
Convert CO2 Magazine and 12gr CO2 Cartridge into HPA highly recommended for units that have been fully upgraded, like this one.
Gimana minat gan? ;D